Справочник Пользователя для HP (Hewlett-Packard) 10000s

To exit the parameter setup mode, scroll to the EXIT option and press the 

On/Off 

key to select YES.

Press the 

On/Off

 key on the heater front panel to confirm.

This section describes system configuration and cable connection procedures.

Before connecting or disconnecting the USB cable, turn the printer OFF.

The following connections are possible.

Printer

USB interface

Printer server (RIP)

Make sure the USB cable is correctly routed to avoid contact with the media.

Before you connect the USB cable, you should ensure that the RIP is installed so that

the printer can be detected by your operating system. Refer to the instructions that came with
your RIP for installation instructions.

ENWW

Connect to a computer

13