Справочник Пользователя для IBM QMS 1725E
Installing the Software
QMS 1725E Print System Getting Started
4-6
3
Open an OS/2 window, and at the C> prompt, change to the
drive in which you inserted the CrownNet Manager disk (for
example,
drive in which you inserted the CrownNet Manager disk (for
example,
a:
↵
).
4
At the drive prompt type
lsminst
x
:
y
:
↵
where
x
is the drive in which you inserted the CrownNet
Manager disk, and
y
is the drive on which CrownNet
Manager will be installed (for example,
lsminst a: c:
↵
).
»
Note: If youve previously installed the CrownNet Manager, you can use
lsminst
x
:
y
: /u
↵
to force installation of the upgraded
software.
The installation program creates and installs the software in
a directory named
a directory named
y
:\CROWN.
»
Note: You cant install the utilities by copying files from the disks. You
must run the installation program.
5
Remove the disk from the disk drive and store it in a safe
place.
place.
6
To start the CrownNet Manager for OS/2 automatically each
time the print server is turned on, add the following com-
mands, in this order, at the end of the STARTUP.CMD file (but
before any @EXIT command):
time the print server is turned on, add the following com-
mands, in this order, at the end of the STARTUP.CMD file (but
before any @EXIT command):
set crownman=c:\crown
start c:\crown\crownman.exe -m
start c:\crown\crownman.exe -m
»
Note: The -m option minimizes the CrownNet Manager window to an icon
after the program opens.
7
To start the CrownNet Manager now, open an OS/2 window
and type the following commands:
and type the following commands:
set crownman=c:\crown
↵
start c:\crown\crownman.exe
↵
The CrownNet Manager window appears.
8
To install specific ports, choose Install from the CrownNet
Manager window.
Manager window.