Справочник Пользователя для IBM QMS 1725E
Installing the Software
4-7
Connecting to an Ethernet Network
9
In the Installation of CrownNet Ports dialog box, select the
appropriate printer port(s) and choose Install.
appropriate printer port(s) and choose Install.
The selected ports are displayed in the CrownNet Manager
window.
window.
»
Note: Port names are either the default or those chosen in Interface
Configuration, later in this chapter.
Workstation
Use this procedure to install the CrownAdmin software on the work-
station. CrownAdmin lets you use Remote Console; it is not neces-
sary for printing via OS/2.
station. CrownAdmin lets you use Remote Console; it is not neces-
sary for printing via OS/2.
1
With the workstation running, insert the disk containing the
CrownAdmin software for DOS or Windows in the disk drive.
CrownAdmin software for DOS or Windows in the disk drive.
2
Open a session under OS/2:
n
OS/2 version 1.
x
—Open a DOS Window session.
n
OS/2 version 2.
x
—Open a WIN-OS/2 session.
3
Refer to the DOS or Windows information elsewhere in this
section, “Software Installation,” for further instructions.
section, “Software Installation,” for further instructions.
»
Note: You cant install the utilities by copying files from the disks. You
must run the installation program.
4
When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
disk drive and store it in a safe place.
5
Skip to “Configuring the Interface,” later in this chapter.
UNIX
»
Note: The procedure described here is for UNIX Host Software installation
from disk. If you have a cartridge or tape, refer to the installation
documentation accompanying the cartridge or tape.
1
Log on the UNIX system as root.