Справочник Пользователя для IBM QMS 1725E
Configuring the Network
QMS 1725E Print System Getting Started
4-14
5
Click the close box.
LAN Manager/LAN Server
1
With the CrownNet Manager for OS/2 installed and running,
add the printer by clicking the Install entry on the action bar.
add the printer by clicking the Install entry on the action bar.
The printer appears in the list displayed on the screen (for
example, QMS_080086000001).
example, QMS_080086000001).
2
Use the appropriate section below to create a print queue
and assign it to the printer.
and assign it to the printer.
OS/2 Version 1.x
If you’re using OS/2 version 2.
x
, skip to the next section.
»
Note: This is the standard method of adding a printer in OS/2 version 1.x.
The procedure is repeated here for your convenience.
Add a Printer
1
With the Print Manager open, from the Setup menu choose
Printers...
Printers...
2
In the Printers dialog box, choose Add...
»
Note: If youre working with an existing printer, select the printer name
and choose Change.
The Add Printer (or Change Printer) dialog box appears.
3
In the Name field, type the printer name (only if you are add-
ing a printer).
ing a printer).
The printer name is local to the workstation and is used to
associate queues with physical printers. It can be the same
as the name used at the printer.
associate queues with physical printers. It can be the same
as the name used at the printer.
4
In the Device box, select the printer’s pipe name.
Pipe names have the form \PIPE\QMS_
name
where
name
is
the printer’s default hardware address or the printer name
set in the “Interface Configuration” section, earlier in this
chapter.
set in the “Interface Configuration” section, earlier in this
chapter.