Справочник Пользователя для IBM QMS 1725E
Configuring the Network
QMS 1725E Print System Getting Started
4-16
7
In the Queue dialog box choose OK to return to the Print
Manager window.
Manager window.
8
Skip to “Print Queue Sharing.”
OS/2 Version 2.x
»
Note: This is the standard method of installing a printer in OS/2 version 2.x.
1
With OS/2 running, double-click the Templates folder.
2
Hold down the right mouse button and drag the Printer icon
out to the Workplace Shell (or into a folder).
out to the Workplace Shell (or into a folder).
3
Type a name in the Printer Name field.
4
Select a printer driver from the Default Printer Driver list.
IBMNULL is recommended.
5
Select a pipe name from the Output Port list.
Pipe names have the form \PIPE\QMS_
name
where
name
is
the printer’s default hardware address or the printer name
set in the “Interface Configuration” section, earlier in this
chapter.
set in the “Interface Configuration” section, earlier in this
chapter.
If a QMS pipe is not available, make sure you have installed
the CrownNet Manager for OS/2.
the CrownNet Manager for OS/2.
6
Choose Create to confirm the new printer definition.
7
Continue with the following section, “Print Queue Sharing.”
Print Queue Sharing
To access a print queue from other workstations or servers on the
network, the queue must be a shared resource. The following proce-
dure is only one of the ways a queue can be shared. For other meth-
ods, see your LAN Manager/LAN Server documentation.
network, the queue must be a shared resource. The following proce-
dure is only one of the ways a queue can be shared. For other meth-
ods, see your LAN Manager/LAN Server documentation.
»
Note: You need administrator privileges to perform this operation.
1
If necessary, with OS/2 running, open an OS/2 window.