Справочник Пользователя для Zebra Technologies S4M
Troubleshooting
Communications Problems
Communications Problems
94
13290L-001 Rev. A
S4M User Guide
10/21/05
Communications Problems
identifies problems with communications, the possible causes, and the recommended
solutions.
Table 18 • Communications Problems
Problem
Possible Cause
Recommended Solution
A label format was sent to
the printer but was not
recognized.
the printer but was not
recognized.
The communication
parameters are incorrect.
parameters are incorrect.
Check the printer driver or software
communications settings (if applicable).
communications settings (if applicable).
Make sure you are using the correct
communication cable. See
communication cable. See
for the requirements.
If a driver is used, check the driver
communication settings for your connection.
communication settings for your connection.
A label format was sent to
the printer. Several labels
print, then the printer
skips, misplaces, misses, or
distorts the image on the
label.
the printer. Several labels
print, then the printer
skips, misplaces, misses, or
distorts the image on the
label.
The serial communication
settings are incorrect.
settings are incorrect.
Ensure that the flow control settings match.
Check the communication cable length. See
requirements.
Check the printer driver or software
communications settings (if applicable).
communications settings (if applicable).
A label format was sent to
the printer but was not
recognized. No printing
occurs.
the printer but was not
recognized. No printing
occurs.
The prefix and delimiter
characters set in the printer
do not match the ones in the
label format.
characters set in the printer
do not match the ones in the
label format.
Verify the prefix and delimiter characters. See
and
for the
requirements.
Incorrect data is being sent
to the printer.
to the printer.
.
Check the communication settings on the
computer. Ensure that they match the printer
settings.
computer. Ensure that they match the printer
settings.
If the problem continues, check the label
format.
format.