Справочник Пользователя для Zebra Technologies S4M

Unpack and Inspect the Printer

10/21/05

S4M User Guide

13290L-001 Rev. A

When you receive the printer, immediately unpack and inspect it for shipping damage. Save all 
packing materials.

Inspect the printer for possible damage incurred during shipment:

• Check all exterior surfaces for damage.

• Raise the media door, and inspect the media compartment for damage to components.

If you discover shipping damage upon inspection:

• Immediately notify the shipping company and file a damage report.

• Keep all packaging material for shipping company inspection.

• Notify your authorized Zebra reseller.

If you are not placing the printer into immediate operation, repackage it using the original 
packing materials. You may store the printer under the following conditions:

• Temperature: –40°F to 140°F (–40°C to 60°C)

• Relative humidity: 5% to 85%, non-condensing

If you must ship the printer:

• Remove any media or ribbon from the printer to avoid damaging the printer.

• Carefully pack the printer into the original container or a suitable alternate container to 

avoid damage during transit. A shipping container can be purchased from Zebra if the 
original packaging has been lost or destroyed.

Zebra Technologies is not responsible for any damage incurred during the 

shipment of the equipment and will not repair this damage under warranty