Справочник Пользователя для Zebra Technologies S4M

Select a Communication Interface

10/21/05

S4M User Guide

13290L-001 Rev. A

The way that you connect your printer to a data source depends on the communication options 
installed in the printer. You may use any available connection to send commands and label 
formats from a host computer to the printer.

Refer to 

. The printer comes standard with an Electronics Industries Association (EIA) 

RS-232 serial interface (DB-9 connector), an IEEE 1284 bidirectional parallel interface 
(unless replaced with an optional print server port), and a USB 1.1 port. You may use any of 
these interface methods to send commands and label formats from a host to the printer.

Connecting a data communications cable while the power is ON may damage 

the printer.

You must supply all interface cables for your application. Refer to 

 for specific cable requirements.

Parallel interface connector (not available on units 
that have an optional print server port)

DB-9 serial interface connector

USB 1.1 connector