Справочник Пользователя для Panasonic PT-F100NTU

When you change the input method, the guidance 
appears in the upper right corner of the screen. The 
following display methods are available. Press I H to 
cycle through the options.

You can switch the logo on/off that is displayed when 
starting up the projector. Press I H to select the 
required option.

 

Active

 

Deactive

 

Display the original text

Q

If you select USER, you can display the 2 lines of 
original text up to 40 characters in 1 line instead of 
the logo.

1. Select USER and press ENTER.
2. Select the required line to enter or edit the original 

text, and press ENTER.

3. Use F G I H to specify the location of the 

required character and press ENTER.

 

The selected character will be displayed in the box.

 

Select DELETE to delete the last entered character 
and press ENTER.

4. Repeat the step 3 until you finish the text to display 

in a line.

5. Select OK and press ENTER to set the entered 

text in a box.

 

Press G and edit the TEXT2 if you need to, and 
repeat the step 3 - 5.

You can switch the function of the COMPUTER2 IN/
1 OUT terminal.

 

 

You can check how long the lamp has been used.

Turn off the guidance.

Display the input method by text. 
The INPUT GUIDE will go out after 
5 seconds without any operation.

Display the input method by graphic. 
The INPUT GUIDE will go out after 
10 seconds without any operation.
If you select any COMPUTER 
terminal which has no signal, the 
computer connection guidance will 
be displayed. See “Computer 
connection guidance” on page 48.

 

 

• LAMP RUNTIME is a relevant matter for lamp 

replacement timing. See “Replacing the Lamp unit” on 
page 43.

• When the lamp unit is replaced with the new one 

(ET-LAF100), the setting will be reset to “0”.

OK

CANCEL

DELETE

TEXT CHANGE