Справочник Пользователя для IBM 24R9718 IB

x

CAUTION: Observe and follow service markings. Do not service the IB Switch Module, except as 
explained in the Topspin documentation supplied with your IB Switch Module. Opening the chassis or 
removing the enclosure cover exposes you to electrical shock and may damage IB Switch Module 
components. 

If one or more of the following situations occurs, do not install the IB Switch Module in a chassis and 
contact your Topspin support representative:
•

The IB Switch Module has been exposed to water. 

•

The IB Switch Module has been dropped or damaged in any way. 

•

The IB Switch Module does not operate correctly after following the installation instructions. 

CAUTION: You must ensure the operating environment meets the IB Switch Module’s electrical and 
environmental operating requirements.

CAUTION: Use the Topspin IB Switch Module only with an approved chassis.

CAUTION: Never place your hand inside an empty card or module bay. You should never have cause 
to place a hand anywhere inside the chassis. Unused card and module bays should always have a cover 
over the bay to ensure proper safety, ventilation, and cooling. 

CAUTION: Opening and/or modifying the expansion modules may void your warranty. Refer to your 
warranty to determine access restrictions.

In general
•

Do not spill food or liquids on your IB Switch Module components. 

•

Place cables appropriately so that they do not obstruct any egress within the data center and they do 
not block any ventilation inlets or outlets. 

For technical support, refer to the following Web site:

http://www.ibm.com/support

To contact technical support, send email to support@ibm.com or refer to one of the telephone numbers 
below.