Справочник Пользователя для Pioneer DVD-RW 4xDVD-RW 16xDVD-R int 1pk BulkBl DVR-108BK

 

The DISP, SWPP bits are not supported and must be set to 0. 

The parameters specified in the Write Parameters Mode Page are not applicable to +R/+RW media. 

The parameters specified in the Write Parameters Mode Page are not applicable to formatted DVD-RW media. 

The default value of the BUFE bit is 1. 

If LS_V bit is set to one, the Link Size field must be set to 7h for CD-R/RW or 10h for DVD -R/-RW. If LS_V bit is set to zero, the 
drive assumes the Link Size of 7h for CD-R/RW or 10h for DVD-R/-RW. The default value of the LS_V bit is 1, and the default value 
of the Link Size field is 10h. 

The drive supports following Write Type. 

for CD-R/RW 

for DVD -R/-RW 

Value 

Definition 

Support  

Test Write 

Support  

Test Write 

00h 

Packet/Incremental 

yes 

yes 

yes 

yes  

01h 

Track-at-once 

yes 

yes 

- 

- 

02h 

Session-at-once/Disc-at-once 

yes 

yes 

yes 

yes  

03h 

Raw 

yes 

- 

- 

- 

The default value of the Test Write bit is 0, and the default value of the Write Type field is 0h. 

When FP bit is set to one for CD-R/RW media, the Packet Size field must be set to 32. Because the drive supports 64K Fixed Packet 
Writing only. The default value of the FP bit is 0. 

The Copy bit is not supported, and setting of this bit is ignored. 

The drive supports following Data Block Type for CD-R/RW media. 

Value 

Block Size 

Definition 

Support for CD-R/RW 

0 

2352 

Raw data 

yes  

1 

2368 

Raw data with P and Q sub-channel 

yes  

2 

2448 

Raw data with P-W sub-channel appended 

yes  

3 

2448 

Raw data with raw P-W sub-channel appended 

yes  

8 

2048 

Mode 1 (ISO/IEC 10149) 

yes  

9 

2336 

Mode 2 (ISO/IEC 10149) 

yes  

10 

2048 

Mode 2 (CD-ROM XA, form 1) 

yes  

11 

2056 

Mode 2 (CD-ROM  XA, form 1) 

yes  

12 

2324 

Mode 2 (CD-ROM XA, form 2) 

yes  

13 

2332 

Mode 2 (CD-ROM XA, form 1, form 2, or mixed form) 

yes  

Note: Parameter setting 

The drive supports writing of DVD and CD. Each media needs different value of Link Size field in  Write Parameters page. Current 
value of parameter can not change by mounted media automatically. But Default value of Link Size field is changed by mounted media. 
If DVD media is mounted, Link Size field of default value in Write Parameter page is set to 10h. If CD media is mounted, it is set to 
07h. It recommends following step to setting the Write Parameters page. 

1. Get default value of Write Parameters by using MODE SELECT command. ( Page Control (PC) field = 10b) 

2. Modify the necessary field on above parameter. 

3. Send the modified parameter by using MODE SELECT command.