Pioneer DVD-RW 4xDVD-RW 16xDVD-R int 1pk BulkBl DVR-108BK 用户手册
产品代码
DVR-108BK
R8 Series Drive Command Reference Manual
Version 0.90
Page 34
4.12.2.4 Time-out & Protect Page
The DISP, SWPP bits are not supported and must be set to 0.
4.12.2.5 Write Parameters Mode Page
The parameters specified in the Write Parameters Mode Page are not applicable to +R/+RW media.
The parameters specified in the Write Parameters Mode Page are not applicable to formatted DVD-RW media.
The default value of the BUFE bit is 1.
If LS_V bit is set to one, the Link Size field must be set to 7h for CD-R/RW or 10h for DVD -R/-RW. If LS_V bit is set to zero, the
drive assumes the Link Size of 7h for CD-R/RW or 10h for DVD-R/-RW. The default value of the LS_V bit is 1, and the default value
of the Link Size field is 10h.
drive assumes the Link Size of 7h for CD-R/RW or 10h for DVD-R/-RW. The default value of the LS_V bit is 1, and the default value
of the Link Size field is 10h.
The drive supports following Write Type.
Table 25 - Write Type Field
for CD-R/RW
for DVD -R/-RW
Value
Definition
Support
Test Write
Support
Test Write
00h
Packet/Incremental
yes
yes
yes
yes
01h
Track-at-once
yes
yes
-
-
02h
Session-at-once/Disc-at-once
yes
yes
yes
yes
03h
Raw
yes
-
-
-
The default value of the Test Write bit is 0, and the default value of the Write Type field is 0h.
When FP bit is set to one for CD-R/RW media, the Packet Size field must be set to 32. Because the drive supports 64K Fixed Packet
Writing only. The default value of the FP bit is 0.
Writing only. The default value of the FP bit is 0.
The Copy bit is not supported, and setting of this bit is ignored.
The drive supports following Data Block Type for CD-R/RW media.
Table 26 – Data Block Type Field
Value
Block Size
Definition
Support for CD-R/RW
0
2352
Raw data
yes
1
2368
Raw data with P and Q sub-channel
yes
2
2448
Raw data with P-W sub-channel appended
yes
3
2448
Raw data with raw P-W sub-channel appended
yes
8
2048
Mode 1 (ISO/IEC 10149)
yes
9
2336
Mode 2 (ISO/IEC 10149)
yes
10
2048
Mode 2 (CD-ROM XA, form 1)
yes
11
2056
Mode 2 (CD-ROM XA, form 1)
yes
12
2324
Mode 2 (CD-ROM XA, form 2)
yes
13
2332
Mode 2 (CD-ROM XA, form 1, form 2, or mixed form)
yes
Note: Parameter setting
The drive supports writing of DVD and CD. Each media needs different value of Link Size field in Write Parameters page. Current
value of parameter can not change by mounted media automatically. But Default value of Link Size field is changed by mounted media.
If DVD media is mounted, Link Size field of default value in Write Parameter page is set to 10h. If CD media is mounted, it is set to
07h. It recommends following step to setting the Write Parameters page.
value of parameter can not change by mounted media automatically. But Default value of Link Size field is changed by mounted media.
If DVD media is mounted, Link Size field of default value in Write Parameter page is set to 10h. If CD media is mounted, it is set to
07h. It recommends following step to setting the Write Parameters page.
1. Get default value of Write Parameters by using MODE SELECT command. ( Page Control (PC) field = 10b)
2. Modify the necessary field on above parameter.
3. Send the modified parameter by using MODE SELECT command.