Справочник Пользователя для Pioneer k DVD-RW 16x4 int ATAPI 10pk bulk black DVR-108BK?10PK

 

The Immed bit is supported. 

The READ DISC INFORMATION Command or READ TRACK/RZONE INFORMATION Command is used to detect 
completion  of the close operation. While close operation is performed by the CLOSE TRACK/RZONE/SESSION BORDER 
Command that the Immed bit is set to one, the drive terminates these commands with the Check Condition status, LOGICAL UNIT 
NOT READY, OPERATION IN PROGRESS  (2/04/07). 

Note: The TEST UNIT READY Command can not use to identify the completion of close operation because the this command 
returns Good status while close operation is performed. 

The Session/Border bit and the Track/RZone bit specified in SFFC INF-8090i are extended to the Close Function field specified in 
MMC-4 as follows. 

Close 

Function 

Media 

Description 

CD-R/RW 

Not valid 

Formatted 

CD-RW 

Not valid 

DVD-R/-RW 

Not valid 

Formatted 

DVD -RW 

Not valid 

+RW 

If a background format is in progress and de-icing is not completed, the format de-icing operation will be 

stopped at some +RW ECC block boundary. No further writing will occur. If there is no background 
format in progress, then no operation shall occur and this will not be considered an error. 

000b 

+R, +R DL 

Not valid 

CD-R/RW 

The drive closes  the track associated with the track number in the CDB. 

If the track is an invisible track, no close operation is to be done. 
If the track is an incomplete track, the drive will write the PMA for the track. If the incomplete track 

has the length of less than 4 seconds, it will pad with all zero main data to the minimum length of 4 
seconds prior to write the PMA. No other padding shall be done. 

If the track is a partially recorded or empty reserved track, the drive will pad until the end of the track. 
In the case of an empty track, the drive will write the track according to the Write Parameters Page. If 

the Write Parameters Page is inconsistent with the PMA, CHECK CONDITION status  will be 
returned and SK/ASC/ASCQ will be set to ILLEGAL REQUEST/ILLEGAL MODE FOR THIS 

TRACK. For a partially recorded reserved track, the drive will continue writing in the same mode as the 
data already recorded. 

Formatted 

CD-RW 

Not valid 

DVD-R/-RW 

If this is a Partially Recorded Reserved RZone or the Empty Reserved RZone, the drive will pad the 

RZone with 00h bytes. If the RZone status is Invisible, no close operation is to be done. In the case of 
an Incomplete RZone, no padding is to be done and cached RMD will be written into the RMA. 

Formatted 

DVD -RW 

Not valid 

+RW 

Not valid 

001b 

+R, +R DL 

The drive closes  the Fragment  associated with the track number in the CDB. 

If the Fragment being closed is reserved and blank or partially written, the drive will pad the Fragment 
to its defined length. User data areas in all pad sectors will be zero filled. 

If the Fragment being closed is an incomplete Fragment and the incomplete Fragment is not blank, then 
a new DCB will be appended into the Session Identification Zone defining the existence of the 

Fragment . 
If the Fragment being closed is an incomplete Fragment and the incomplete Fragment is blank, then the 

command will be terminated with GOOD status and sense data will be set to NO SENSE/NO 
ADDITIONAL INFORMATION.