Справочник Пользователя для Acer R910 Series

 3 System upgrade

56

8

Install the slot cover over the empty slot, then rotate the retention 
latch downward (C). 

9

Observe the post-installation instructions described on page 34.

Installing a hot-plug PCI card 

1

If your server is operating, use your OS to power down the PCI slot. 

2

Observe the ESD precautions described on page 33.

3

Locate an empty expansion slot on the mainboard. 

4

Rotate the slot retention latch on the rear of the card slot upward. 

5

Pull up the slot cover.

6

Remove the PCI add-in board from its protective packaging. 

7

Align the card in the empty slot. 

8

Insert the card into the selected slot. Make sure that the card is 
properly seated. 

9

Rotate the retention latch downward. 

10 Connect any required cable to the card. 

11 When using the hot-plug PCI card with OS hot-plug interface:

•

Wait for the software user interface to appear on your 
monitor and then confirm the device to be enabled. 

•

Wait for the power LED to turn on.