Справочник Пользователя для Acer R910 Series

 3 System upgrade

58

DVD drive

Removing the DVD drive

1

Observe the ESD precautions and pre-installation instructions 
described on page 33.

2

Disconnect the power and SATA cables from the SATA-to-IDE 
converter board on the rear of the media device (A). 

3

Press the blue release latch on the media device carrier (B).

4

Slide the media device from the front opening in the faceplate of 
the system (C).

Installing the DVD drive

1

Observe the ESD precautions and pre-installation instructions 
described on page 33.

2

If necessary, remove the old DVD drive. See previous section.