Справочник Пользователя для Acer G901

69

 

Installing and removing a hot-plug PCI 
add-in board

To install a hot-plug PCI add-in board

1

Remove the rear access panel (refer to page 44).

2

If the LED for the slot indicates that power to the slot is on, turn it 
off by using the PCI hot-plug application software on your system.  

The LED adjacent to the slot should now be off.

3

Open the latches on the front and rear retention mechanisms 
(Figure 34, A and B).

4

If necessary, remove and save the expansion slot cover.

  Figure 33 - Hot-plug PCI add-in board status indicators

BB!H:11!vh!.!FO/cppl!!Qbhf!7:!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN