Справочник Пользователя для Acer G901
3 Hardware configuration
70
5
Prepare the new PCI board for installation:
a
Remove the add-in board from its protective wrapper. Be
careful not to touch the components or gold edge connectors.
Place the add-in board with the component side up on an
antistatic surface.
careful not to touch the components or gold edge connectors.
Place the add-in board with the component side up on an
antistatic surface.
b
Record the serial number of the add-in board in your
equipment log.
equipment log.
c
Set jumpers or switches according to the manufacturer's
instructions.
instructions.
6
On the edge opposite the connectors, grasp the board by both
corners. Orient the board to the vacant hot-plug slot so that the
metal retention bracket is toward the rear of the chassis.
corners. Orient the board to the vacant hot-plug slot so that the
metal retention bracket is toward the rear of the chassis.
7
Insert the board into the front and rear retention mechanisms.
Carefully push down on the board until it engages and fully seats
in the slot connector.
Carefully push down on the board until it engages and fully seats
in the slot connector.
8
Close the front and rear latches.
9
Figure 34 - Installing a hot-plug PCI add-in board
BB!H:11!vh!.!FO/cppl!!Qbhf!81!!Gsjebz-!Kbovbsz!28-!3114!!8;24!QN