Справочник Пользователя для Lucent Technologies 108596560

Issue 6

December 1999

Hospitality Operations 

54

Front Desk Operations 

In a non-Property Management System (PMS) environment, automatic selection 
of DID numbers to a guest room allows a guest to have a phone number not 
associated with their room number. This will be a 7- to 10-digit number for 
outside callers; for calls inside the hotel, either the room/extension number or 
the 2- to 5-digit DID number can be used.

To provide DID numbers to a guest in room 6001, perform the following:

1. Press the 

CHECK-IN

 button on the console.

2. Enter the guest’s room number (6001) and press the 

#

 button.

The following displays:

3. Press 9 (yes) or 6 (no).

If yes, the DID number is assigned on a first-in first-out (FIFO) basis. The 
following displays:

To view and change DID number, perform the following:

1. Press the 

DID VIEW

 button. The following displays:

2. Enter the extension number you wish to view or change followed by the 

# 

button. The following displays:

3. If you are just checking the DID number, enter the 6 numbers.

4. If you want to change the DID number, enter 9 (yes). The next available 

DID number displays:

5. Enter 9 (yes) repeatedly to step through the list of available DID numbers.

6. When the display shows the number you want to use, press the 

#

 button. 

The following displays:

CHECK IN - Ext:

DID?

CHECK IN COMPLETE:

DID= 6499

DID VIEW:  EXT?

DID= CHANGE?

DID= 3900  CHANGE?

DID= 3901  CHANGE? 

DID VIEW DONE