Справочник Пользователя для Metrologic Instruments IS8000

 

 

15

 

 

 

 

Green and Red LEDs 

 

The red LED is on when the unit is done power up, the VLD is emitting light 
and the unit is ready to scan.  The green LED flashes when the scanner 
has read a bar code successfully.  The functions of the LED's can be 
reversed through special configuration with the MetroSet

®

2

 

configuration 

program.  See the Visual and Audible Indicators section of this guide for 
more details.

 

 

 

 

 

Speaker 

 

The speaker is configured to emit a beep when a bar code has been 
transmitted.  The IS8800 has an additional 90 dB speaker location on the 
side of the case.

 

 

 

 

Laser Output Window 

 

This aperture emits and receives laser light. 

 

 

D-type Connector Area 

 

This area contains four D-type male connectors, a 25-pin, 15-pin, and two 
9-pin D-sub connectors.  The 25-pin connector is designed to attach a 
communication cable to the host device. The 15-pin connector is used to 
attach two scanners as primary/secondary and/or to connect the MX001 
industrial control interface to the scanner.  The first 9-pin connector is used 
to attach the power supply to the scanner and the second 9-pin connector 
is used to attach a hand held 5V non-decode type scanner to the 
HoloTrak

®

.   Refer to Appendix C for Pinout details.

  

 

 

The 8-pin Male AMP Connector is used to attach the optional MX008 
external speaker box.  Refer to Appendix C for Pinout details