Справочник Пользователя для Kodak 6J7611A

A-61500  May 2010

3-9

The scanner has three multi-feed detection sensors. When Multi-feed 
detection is enabled, adjust the side guides so the documents fully 
cover at least one sensor. If the document partially covers a sensor, 
false multi-feeds may occur.

To scan a batch of documents follow the guidelines for size, type, 
quantity, etc., outlined in the “Document preparation” section.

For faster throughput, place documents into the elevator tray in 
landscape orientation (longer side as the leading edge).

1. Align the leading edges of the stacked documents.

2. Position the stack of the documents, face up in the elevator tray so it 

covers the paper present sensor.

NOTE: For Kodak i700 Series Scanners, Firmware Version 2.1.1 

(or higher): When the i700 Series Scanner is powered-on 
and paper is added to the elevator tray, the elevator will rise 
to the “ready to feed” position. If you need to lower the 
elevator tray, move the stack of documents slightly away 
from the paper present sensor and the elevator tray will 
return to the original Paper Source position (e.g., 250 
Sheet, 500 Sheet, etc.) .

3. Adjust the elevator tray side guides.

4. Adjust the output tray position, if necessary.

5. Adjust the output tray end stop, if necessary.

Depending on how your scanner is set up, your documents will 
automatically start scanning, or you may need to press the Start/
Resume button to begin scanning.