Справочник Пользователя для TANDBERG 5000

========= TCP/IP Settings  ==========

IP-assignment:

DHCP Static

IP-address:

___.___.___.___

IP-subnet mask:

___.___.___.___

Gateway:

___.___.___.___

Previous Menu

DHCP (Dynamic Host Configuration Protocol) can be selected when a DHCP server is present. When

using DHCP, IP-address and IP-subnet mask is not used because these parameters are assigned by the

DHCP server. When using DHCP the IP address given is displayed in the boot-up text and in ‘Test

Subsystem’.

If Static is selected, the codec’s IP-address and IP-subnet mask must be specified in the IP-address field.

A IP-address defines the network address of the codec and is defined by 4 numbers in the range of 0-255.

This address is only used in static mode. The IP-address can be found in the boot-up text.

A IP-subnet mask defines the type of network and is defined by 4 numbers in the range 0-255. This address

is only used in static mode.

If the setting is 255.255.255.0 the local network can have 256 nodes. This is a class C network.

If the setting is 255.255.0.0 the local network can have 65536 nodes. This is a class B network.

When using DHCP, the default gateway should automatically be set. If the LAN utilizes static IP’s, an IP

number, subnet mask, and default gateway must be specified by the LAN administrator.

See section ‘Ethernet Functionality’ for further information.

The IP-address and IP-subnet mask entries
will be greyed out when IP-assignment is
set to DHCP and are then not valid.