Справочник Пользователя для TANDBERG 5000

The system supports TCP/IP connectivity over Ethernet. The following functionalities are supported:

• Control of the system via a standard WWW-browser
• Dataport access using Telnet (described in the document ‘Dataport User Guide’)*.
• Software Upgrade using WWW-browser or FTP (described in the document ‘Upgrading Software’)*.
• SNMP (Simple Network Management Protocol) (MIB-II)*.

It is possible to access the system remotely via a local area network (LAN) using a standard WWW-

browser.

LAN port

LAN  port

• PC with a WWW-browser.

• Ethernet cable (RJ-45).

• LAN-network port.

NOTE: You should not connect the PC directly to the

codec. The connection should always go through a local

area network.

Local Area

Network - LAN

* - Please contact your dealer for further information.