Инструкции Пользователя для Bose PDF259774_00

Normally, the Wave/PC

™

 software keeps the radio clock synchronized with the clock in your 

computer. If you choose to disable this option in the General setup menu, you can set the 
clock using the Wave/PC unit’s control panel. Press and hold the Clock Set button and use 
the Tuning up and down buttons to change the clock time.

To go to sleep listening to music, press the Sleep/Snooze button on the control panel to set 
the automatic shutoff time. The display shows the last setting in minutes. Press again, or 
press and hold to set the time until shutoff to 75, 60, 45, 30, 15, 10, 5, or 0.

You can use the Sleep mode for any music source.

There are two alarms indicated on the clock display as ALARM (primary) and ALARM 2 (sec-
ondary). You can set the wakeup time for either alarm with the Wave/PC unit on or off. The 
indicator for the selected alarm flashes when setting time or mode. The ALARM 2 indicator 
continues flashing for 10 seconds after setting ALARM 2.

Press and hold Alarm Set. Press Alarm Mode to select ALARM or ALARM 2. The indicator 
flashes for the alarm you are setting.

Press and hold Alarm Set and press Tuning up or down. The time display changes slowly at 
first, then more quickly. Release Tuning to stop.

After selecting the alarm, release Alarm Set and press Alarm Mode to select one of the fol-
lowing alarm modes:

• For tone only, press until you see the 

 indicator.

• For music only, press until you see the 

 indicator.

• For tone and music, press until you see both indicators 

.

Follow the directions for setting the alarm mode. Press Alarm Mode until the display shows 
no alarm mode indicators.

Press and hold Alarm Set to see the ALARM wakeup time and the preset station. While hold-
ing Alarm Set, press Alarm Mode to see the ALARM 2 wakeup time and the preset station.