Справочник Пользователя для Intel SERVER CHASSIS SR2500 SR2500

Intel® Server System SR2500AL 

Amber 

Solid on 

Critical, non-
recoverable 

Fatal alarm – system has failed or shutdown 

  DIMM failure when there is one DIMM present, no good 

memory present 

  Run-time memory uncorrectable error in non-redundant 

mode 

  IERR signal asserted 
  Processor 1 missing 
  Temperature (CPU ThermTrip, memory TempHi, critical 

threshold crossed) 

  No power good – power fault 
  Processor configuration error (for instance, processor 

stepping mismatch) 

 
 

When AC power is first applied to the system and 5V-STBY is present, the BMC controller on 
the server board requires 15-20 seconds to initialize.  During this time, the system status LED 
will blink, alternating between amber and green, and the power button functionality of the control 
panel is disabled, preventing the server from powering up.  Once BMC initialization has 
completed, the status LED will stop blinking and the power button functionality is restored and 
can be used to turn on the server.

 

The drive activity LED on the front panel indicates drive activity from the onboard hard disk 
controllers. The Intel

®

 Server Board S5000PAL also provides a header giving access to this 

LED for add-in controllers. 

The blue system identification LED is used to help identify a system for servicing. This is 
especially useful when the system is installed when in a high density rack or cabinet that is 
populated with several similar systems. 

 The blue system ID LED can be illuminated using either of two mechanisms.  

- 

By pressing the system ID button on the system control panel, the ID LED will display a 
solid blue color until the button is pressed again. 

- 

By issuing the appropriate hex IPMI chassis identify value, the ID LED will either blink 
blue for 15 seconds and turn off or will blink indefinitely until the appropriate hex IPMI 
chassis identify value is issued to turn it off.