Справочник Пользователя для Wagner SprayTech 110v

 

REPAIRS AT THE UNIT

Only have the pressure control valve (1) re-

placed by the customer service.

The max. operating pressure has to be reset 

by the customer service.

1

7

2

3 4

5

6

1

1.  Use a 22 mm wrench to screw the outlet valve from the 

paint section.

2.  Carefully pull of the clasp (1) using the enclosed screw-

driver. The compression spring (2) presses ball (4) and 

valve seat (5) out.

3.  Clean or replace the components.

4.  Check the O-ring (7) for damage.

5.  Check the installation position when mounting the spring 

support ring (3) (clipped onto spring (2)), outlet valve seat 

(5) and seal (6), refer to figure.