Справочник Пользователя для Wagner SprayTech 0558011 0558012 0558013 0558028 0558096 0558097 0558098

ProSpray 3.25 

5

Safety regulations 

General view of application

PREVENTION:

•  Do not use materials containing bleach or chlorine.

•  Do not use halogenated hydrocarbon solvents such

as methylene chloride and 1,1,1 - trichloroethane. 
They are not compatible with aluminum and may 

cause an explosion. If you are unsure of a material’s

compatibility with aluminum, contact your coating’s

supplier.

•  Read all instructions and safety precautions before

operating equipment.

•  Follow all appropriate local, state, and national codes

governing ventilation, fire prevention, and operation.

•  Pulling the trigger causes a recoil force to the hand

that is holding the spray gun.  The recoil force of the 
spray gun is particularly powerful when the tip has 
been removed and a high pressure has been set on 
the airless pump. When cleaning without a spray tip, 
set the pressure control knob to the lowest pressure.

•  Use only manufacturer authorized parts. User

assumes all risks and liabilities when using parts that 

do not meet the minimum specifications and safety

devices of the pump manufacturer.

•  Before each use, check all hoses for cuts, leaks,

abrasion or bulging of cover.  Check for damage or 
movement of couplings. Immediately replace the hose 

if any of these conditions exist. Never repair a paint

hose. Replace it with another earthed high-pressure 
hose.

•  Make sure power cord, air hose and spray hoses are

routed in such a manner to minimize slip, trip and fall

hazard.

•  Clean up all material and solvent spills immediately to

prevent slip hazard.

•  ALWAYS follow the material manufacturer’s

instructions for safe handling of paint and solvents.

•  Do not use this unit in workshops that are covered

under the explosion prevention regulations.

•  Always unplug cord from outlet before working on

equipment (electric units only).

•  Always keep the power cord plug in sight during usage

to prevent any accidental shutdown or startup. 

•  Wear ear protection. This unit can produce noise

levels above 85 dB(A).

•  Device weighs in excess of 18 kg. Two-person lift is

required.

•  Never leave this equipment unattended. Keep away

from children or anyone not familiar with the operation 
of airless equipment.

•  Do not move unit while unit is running.

•  Do not spray on windy days.

•  Use a respirator or mask if vapors can be inhaled.

Read all instructions supplied with the mask to be sure 
it will provide the necessary protection.

 

•  Wear protective eyewear.

•  Wear protective clothing as required by coating

manufacturer.

Electric models must be earthed.  In the event of an 
electrical short circuit, earthing reduces the risk of electric 
shock by providing an escape wire for the electric current.  
This product is equipped with a cord having an earthing 
wire with an appropriate earthing plug.  The plug must be 
plugged into an outlet that is properly installed and earthed 
in accordance with all local codes and ordinances.

Check with a qualified electrician or serviceman if the earthing

instructions are not completely understood, or if you are in doubt as to 
whether the product is properly earthed.  Do not modify the plug provided.  

If the plug will not fit the outlet, have the proper outlet installed by a

qualified electrician.

These may only be carried out by a skilled electrician. No liability

is assumed for incorrect installation.

Uncontrolled Copy