Справочник Пользователя для Shindaiwa SP300

 

This manual contains information for the proper assembly, 

operation and care of your SP300 backpack sprayer. Carefully 

read and follow the instructions contained in this manual before 

operating your sprayer.

Unpack the following 

items shipped in your 

sprayer box:


  Wand



  Pump Lever 



  Tank Assembly 

and Connecting 

Rod



  Small Parts Kit



  From inside the 

sprayer tank, 

remove the  

plastic bag from 

the tank strainer.

Net Weight ......................................................... 8.4 pounds (3.8 kg)
Tank Capacity ......................................3.0 U.S. gallons (11.4 liters)
Tank Material ...............................................................Polyethylene
Fill Opening Diameter .................................... 4.5 inches (114 mm)
Pump Type/Material  ................................................ Piston/Plastic
Operating Pressure ..........................15-65 psi (1.05-4.6 kg/sq. cm)
Wand Assembly Length................................ 27.5 inches (699 mm)
Hose Length .............................................. 69.75 inches (1771 mm)
Nozzle Installed .............................................. Red Adjustable Cone

Specifications subject to change without notice.

1.  Remove the hitch pin from the pump lever shaft.
2.  Install a flat washer on the connecting rod.
3.  Lightly grease the holes in the pump lever and assemble on 

to the pump lever shaft and connecting rod. Secure with flat 

washers and hitch pins.