Справочник Пользователя для Shindaiwa SP300

Push the wand into the trigger valve and secure with screw 

cap. Hand tighten to prevent leakage.

CAUTION! 
Do not overtighten!

1.  Place the sprayer on 

your back with the 

straps loosened.

2.  Hold the adjustment 

ring firmly and pull 

until backpack is 

secure in place.

Lift up on the buckle to release tension.

IMPORTANT!

After assembling the sprayer, fill the tank with clear water and 

lay it on its side. Check for leaks. Return sprayer to its upright 

position. Pump the lever 10-15 times and check for leaks. 

Most leaks can be stopped by tightening the appropriate con-

nection or fitting. Any leaks must be stopped prior to filling the 

sprayer with chemicals.