Справочник Пользователя для Hitachi NT 65MA4 (S)

11

(2) Adjust the air pressure to 70 psi (4.9 bar  5 

kgf/cm

2

).

 

Connect the air hose.

 

Do not load any nails in the Nailer.

  Set the switching device to the upward 

position (SINGLE SEQUENTIAL 

ACTUATION MECHANISM).

  (Set the switching device to the upward 

position completely as shown in the 

diagram. Otherwise, it will not operate 

properly.)

Switching Device

Upward position

□  The nailer must not leak air.

(3) Remove  the  fi nger from the trigger and 

press the push lever against the wood.
□  The nailer must not operate.

Depress 

Push 

Lever

Do not pull Trigger

(4) Separate the push lever from the wood.

  Next, point the nailer downward, pull the 

trigger and then wait in that position for 5 

seconds or longer.
□  The nailer must not operate.

Pull Trigger

(5) 1  Without touching the trigger, depress 

the push lever against the workpiece.

   

Pull the trigger.

□  The nailer must operate.
2

 Remove the fi nger from the trigger.

□ Nailer operation will end (the driver 

blade will return to the top).

(6) Set the switching device to the downward 

position (CONTACT ACTUATION 

MECHANISM).

  (Set the switching device to the downward 

position completely as shown in the 

diagram. Otherwise, it will not operate 

properly.)

Switching Device

Downward position

  With the Nailer off  the workpiece, pull the 

trigger.

  Depress the push lever against the 

workpiece.
□  The nailer must operate.

000Book_NT65MA4(S)_US.indb   11

000Book_NT65MA4(S)_US.indb   11

2010/11/24   9:04:29

2010/11/24   9:04:29