Справочник Пользователя для Cuisinart CSS-100

7

Problem

Solution

•  A genuine Cuisinart Single-Use Recyclable CO

2

 Charger 

– Powered by SodaSparkle™ has not been used. 

•  The CO

2

 charger has not been pressed firmly into place 

until a click is heard, or has been loaded at an angle.

•  The carbonator head has not been screwed firmly onto 

the bottle.

•  The charger chamber has not been screwed firmly 

down onto the carbonator head.

•  The piercing unit inside the carbonator head has been 

damaged (in this case please send the complete unit in 

for service to an authorized Cuisinart service agent).

•  The beverage bottle has been filled above the “Water 

Fill line” indicator.

•  The carbonator head has not been screwed on tightly.
•  The carbonator head has been unscrewed before 

carbonation is complete.

•  The unit has been held at an angle while carbonating.
•  More than one CO

2

 charger has been used to carbonate 

the same bottle contents (double-carbonating).

•  The charger chamber and carbonator head have been 

unscrewed too soon.

•  No CO

2

 charger has been inserted into the charger 

chamber.

•  A used (empty) CO

2

 charger has been used. An empty 

CO

2

 charger will have a hole at the tip where it was 

pierced.  

•  The water used for carbonation was not cold enough.

•  The unit has been used repeatedly in a very short  

period of time. Rinse the carbonator head in warm 
water for 30 seconds and reuse.

•  The CO

2

 charger may be incompatible. Use only 

Cuisinart Single-Use Recyclable CO

2

 Chargers –  

Powered by SodaSparkle™.

•  The safety window is not fully open. Use the toggle to 

open the safety window completely.

•  The charger chamber is still screwed down onto the 

carbonator head. Unscrew and remove completely to 
enable insertion or ejection of the CO

2

 charger.