Справочник Пользователя для Dualit DCM1

20

Having heated the machine and filled the filter with coffee
you are now ready to make your espresso.

1. Locate the filter holder (7) into the brewhead (6).

2. Ensure that the filter holder is square and well

seated in the brewhead, then rotate the handle to the 
right as far as possible. You will feel it locate in place. 

IMPORTANT: Do not force it or you may damage the 
brewhead gasket (6). If it doesn't turn easily, try again 
as the filter holder may not be properly located in the 
brewhead.

3. Place 1 or 2 warmed cups under the nozzles of the 

filter holder. Make sure your cups are directly under 
both nozzles or your espresso will pour away into the 
drip tray (8). 

Your Dualit machine will fit either an espresso 
cup or a full-size mug under the filter holder – if you 
are making a long coffee you may wish to extract your
espresso directly into a mug or larger cup.

4. To pour your espresso, turn the control knob (5) 

anticlockwise to the cup symbol. You will
hear the pump operating; this is quite 
normal.

NOTE: The control knob (5) may be a harder to turn 
when the machine is new. This will  loosen with use.

5. When the coffee machine has reached the correct 

temperature for extraction, the orange temperature 
indicator light (12) will go out and the espresso will 
trickle out of the filter nozzles. This may take a few 
seconds.

6. When the cup has been filled to the desired level 

(about 20 – 25 seconds for an espresso) turn the 
control knob to the off position. Water will continue to
flow for about 5 seconds after the machine is switched
off.

DCM1 instruction manual_figs out.qxp  18/04/2008  14:30  Page 20