Справочник Пользователя для Capresso Impressa J5

,

• Push and hold the Rotary Dial until the display shows 

.

• Turn the dial clockwise until the display shows 

.

• Push the rotary dial. The display shows 

• Turn the dial until the display shows 

✓

.

• Push the rotary dial. For two seconds the display shows 

and then 

✓

.

• Turn the rotary until the display shows 

.

• Push the rotary dial. 

.

17.4 SETTING THE TIME
Setting the time lets you set an auto-on time (chapter 17.5).

,

• Push and hold the rotary dial until the display shows 

.

• Turn the dial clockwise until the display shows 

• Push the rotary dial. The display shows  

Turn the dial to set

the hour and push the dial to confirm the hour setting.

• Turn the dial to set the minutes and push to confirm  For two 

seconds the display shows 

and then 

.

• Turn the rotary until the display shows 

.

• Push the rotary dial. 

.

Please note: If you turn the machine off with the main power
switch (Fig. 1a) or if you unplug the machine or experience a
power outage, the actual time will not be retained. The next time
you turn the machine on, the display will first show 

.

Turn the Rotary dial to set the hours, then push the Rotary dial.
Turn the Rotary dial again to set the minutes and push to 
confirm. Now the 

time will be automatically restored

(see next chapter).

You can set a time at which the machine turns itself on. This way
you don’t have to wait for the machine to warm up. At the pro-
grammed time the J5 turns itself on, it will start heating and the
display will then show 

. Just push the Rinse button and

within seconds you can brew your first cup of coffee.  
Please note: Auto-on will only work if you set the actual time
and the main power switch is turned on (when the small red light
in the On/Off switch is illuminated, you know that the main
power is on).
Setting the time allows you to program an auto-on time.

,

• Push and hold the rotary dial until the display shows 

.

• Turn the dial clockwise until the display shows 

.

• Push the rotary dial. The display shows  

• Turn the dial to set the hour and push the dial to confirm the 

hour setting.

• Turn the dial to set the minutes and push to confirm  For two 

seconds the display shows 

and then 

.

• Turn the rotary until the display shows 

.

• Push the rotary dial. 

.

Your machine is pre-set to turn itself off 2 hours after last use.
You can set the Auto-Off from .5 hour to 15 hours or you can set
it to 

. In this case the machine will not turn itself off

automatically.
Recommendations:
• If you use the machine only in the morning, leave the auto-off 

at 2 hours. 

26.