Справочник Пользователя для Vulcan-Hart SPER2 ML-52919

— 3 —

Your Vulcan fryer must be installed in accordance with:

1. State and local codes.

2. The National Electrical Code, ANSI/NFPA No. 70 (latest edition).  Copies may be obtained from The

National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

3. NFPA Standard #96.

Place a carpenter's level on top of the fryer and level the fryer front-to-back and side-to-side by turning
the adjustable legs.  If your fryer is equipped with the optional non-adjustable casters, the fryer must
be placed on a level surface.

WARNING:  ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE
APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL
ELECTRICAL CODES.

WARNING:  DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE
DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.

Place fryer as near to its final position as possible.  Connect 3-phase line to X, Y and Z of terminal block.
To reach terminal block, remove electric cover plate.

For each 15

1

/

2

" section, a 3-phase supply line capable of handling 16 KW at the fryer's rated voltage

(208, 240, 480) is required.  A hood ventilator interlock should be connected to 1 and 2 on the 4-pole
barrier strip.  1 and 2 go to a set of dry contacts on the power switch.  (

3

/

4

 HP fan maximum, if needed.)

A wiring diagram is located inside the front door panel.