Справочник Пользователя для Liebherr 211111 7085270 - 00

If  the  appliance  is  installed  in  a  very  damp  environment,

condensate may form on the outside of the appliance.

u

Always see to good ventilation at the installation site.

Risk of damage by condensate to appliances installed side-by-

side!

If refrigerator and freezer are installed side-by-side, the freezer

always has to be to the right of the refrigerator, as seen from

the front.

u

Do not change over the door hinges.

Ensure that the following tools are to hand:

q

Cordless screwdriver Torx® 15, 25

q

Screwdriver Torx® 15, 25

Slide the appliance 2/3 of the way into the recess.
Pull out the power plug.
Open the door.

Fig. 1 

Risk of injury if soft stop contracts!

u

Detach with care.

u

Pushtension  spring

  Fig.  1  (11)

  outwards,  using  a  screw-

driver.

u

Lowersoft stop mechanism

 Fig. 1 (2)

 for removal.

u

Unscrewholder

 Fig. 1 (1)

.

u

Unscrew the ball stud

 Fig. 1 (3)

 (Torx® 25).

Fig. 2 

u

Lift off covers

 Fig. 2 (1)

.

u

Only slacken fastening screws

 Fig. 2 (2)

.

u

Remove door: push outwards, unhinge and set aside.

Fig. 3 

u

Fold away the cover of the turn hinge

 Fig. 3 (3)

.

u

Unscrew  turn  hinge

  Fig.  3  (3)

  together  with  compartment

door.

u

Unscrew closing element

 Fig. 3 (4)

.

u

Close  the  vacated  holes  with  the  accompanying  stoppers

Fig. 3 (5)

.

Fig. 4 

u

Fit the closing element

 Fig. 4 (4)

.

u

Fit the compartment door at the top.

u

Fit the turn hinge

 Fig. 4 (3)

 and fold the cover.

Risk of injury if hinges fold!

u

Leave hinges open.