Справочник Пользователя для National Instruments 321645c-01
Chapter 2
Function Reference — RTSI_Clock
NI-DAQ FRM for PC Compatibles
2-288
©
National Instruments Corporation
RTSI_Clock
always returns an error if deviceNumber is not an AT-MIO-16X,
AT-MIO-64F-5, AT-AO-6/10, or a DIO 6533 (DIO-32HS). To connect the system clock
signal of any other device to the RTSI bus, you must change a jumper setting on the device.
See the appropriate user manual for instructions.
signal of any other device to the RTSI bus, you must change a jumper setting on the device.
See the appropriate user manual for instructions.
Note
If you are using an E Series device, see the
Select_Signal
function.