Справочник Пользователя для HP (Hewlett-Packard) 4100N

EN

Correcting output quality problems 135

Turn over the stack of paper in the tray. Also, try rotating the paper 
180

°

.

Make sure that paper type and quality meet HP specifications 
(see “Paper specifications” on page 188).

Make sure that the environmental specifications for the printer are 
being met (see “Printer specifications” on page 200).

Try printing to a different output bin.

If media is lightweight and smooth, try using a low fuser mode to 
reduce the heat in the fusing process. At the printer control panel, 
use 

CONFIGURE FUSER MODE MENU

 on the Paper Handling Menu 

to do this (see “Paper Handling Menu” on page 210).

Print a few more pages to see if the problem corrects itself.

Make sure that the environmental specifications for the printer are 
being met (see “General specifications” on page 202).

Turn over the stack of paper in the tray. Also, try rotating the paper 
180

°

.

Make sure that paper is loaded correctly, all adjustments have 
been made, and the paper is under the corner tabs (see “Loading 
tray 1” on page 46 and “Loading trays 2, 3, and 4” on page 47).

Make sure that paper type and quality meet HP specifications 
(see “Paper specifications” on page 188).

If envelopes are creasing, try storing envelopes so that they lie 
flat.

Print a few more pages to see if the problem corrects itself.

Make sure that paper type and quality meet HP specifications 
(see “Paper specifications” on page 188).

Replace the toner cartridge.