Справочник Пользователя для Pelco FR8302A
10
C1649M (1/06)
REAR PANEL
Connections to the FR8302A receiver are made to the rear panel of the module (refer to Figure 3).
Figure 3. Rear Panel of FR8302A Receiver
NOTE: For each channel, the FR8302A receiver provides two video output connectors: one UTP
connector and one BNC connector. For each channel, only one of the video output connectors can be
used at one time.
connector and one BNC connector. For each channel, only one of the video output connectors can be
used at one time.
For additional information about rear-panel connections, refer to the Installation section.
RACK POWER/ALARM CONNECTOR, 4-pin connector for power/alarm connection of rack-
mounted module
mounted module
STANDALONE POWER CONNECTOR, 2-pin connector for power connection of standalone
module; removable mating connector with screw terminals (not shown)
module; removable mating connector with screw terminals (not shown)
FIBER OPTIC CONNECTOR (per channel), ST or FC (dependent on FR8302A model)
VIDEO OUT UTP (UNSHIELDED TWISTED PAIR) CONNECTOR (per channel), 100-ohm
differential analog video output; 2-pin connector; removable mating connector with spring-
cage terminals (not shown)
differential analog video output; 2-pin connector; removable mating connector with spring-
cage terminals (not shown)
VIDEO OUT BNC CONNECTOR (per channel), 75-ohm analog video output