Справочник Пользователя для Mitsubishi Electronics FR-A701

 appears...Why? 

Parameter read error. Perform operation from step 3 again.

 appears...Why? 

Parameter write error. Perform operation from step 8 again.

Whether same parameter values are set in other inverters or not can be checked.

 flickers ... Why?

Set frequencies, etc. may be different. Check set frequencies.

• Hold down        to verify.

2.

Screen at power-ON

     The monitor display appears.

Display

Operation

7.

Press         to read the parameter setting

     of the verified inverter to the operation panel.

1.

Move the operation panel to the 

     inverter to be verified.

• Move it during a stop.

4.

Turn        until              (parameter copy) 

     appears.

6.

Turn       to change it to the set value

     "   "(parameter copy verification mode).

8.

It there is no difference, "            " and "   "

     flicker to complete verification.

Flickers for about 30s

Flickering

 • If different parameters exist, different 
    parameter numbers and           flicker.

The parameter 
number read
 previously appears.

5.

Press         to read the currently set

     value.

     "    "(initial value) appears.

3.

Press        to choose the parameter 

     setting mode.