Справочник Пользователя для Mitsubishi Electronics E60

II - 16 

 

Pressing the menu key  

I/O
PARA

  displays the I/O BASE PARAM screen. 

There are basically two types of input/output parameters which must be set when inputting‚ outputting or 
referring to data‚ or when performing tape operation. One type is the parameters related to the input/output 
device. The baud rate‚ etc.‚ is set according to each device. Up to five types of input/output devices can be 
registered. The other type of input/output parameters is the I/O base parameters which determine which 
device is connected to which channel per input/output application.  
 

<I/O> 

<PORT No.> 

<DEV. No.> <DEV. NAME> 

 

 

Specify the board No. to which the serial 
input/output device is connected to 2. 
• Set "2". 

 

Set the input/output device No. for 
each application. 
The device Nos. are 0 to 4 and 
correspond to the input/output 
device parameters.  
The device name set in the 
input/output device parameter is 
also displayed for identification. 

DATA IN 

9001  Specify the port for inputting the data 

such as machine program and 
parameters. 

9002 Specify the No. of the device that 

inputs the data. 

DATA OUT 

9003  Specify the port for outputting the data 

such as machine program and 
parameters. 

9004 Specify the No. of the device that 

outputs the data. 

TAPE MODE 

9005  Specify the input port for running with 

the tape mode. 

9006 Specify the No. of the device to be 

run with the tape mode. 

MACRO 
PRINT 

9007  Specify the output port for the user 

macro DPRINT command. 

9008 Specify the No. of the device for the 

DPRINT command. 

PLC IN/OUT 

9009  Specify the port for inputting/outputting 

various data with PLC. 

9010 Specify the No. of the device for the 

PLC input/output. 

REMOTE 
PROG IN 

9011  Specify the port for inputting remote 

programs. 

9012 Specify the number of the device 

used to input remote programs. 

EXT UNIT 

9013  Specify the port for communication with 

an external unit. 

9014 Specify the number of the unit used 

for communication with an external 
unit