Справочник Пользователя для Mitsubishi Electronics E60

II - 21 

 

Pressing the menu key  

SETUP

 displays the OPEN SETUP PARAM screen. 

The system’s basic parameters are normally hidden as setup parameters to prevent mistaken operations 
and to simplify the display. 
The setup parameters can be displayed and set by making a declaration to open the setup parameters on 
this screen. 

 
 

 
 

1) 

Select the setup parameter. 
Key-in "Y"  in # ( )‚ and then press INPUT. 

 

The basic specification parameter screen appears and the normally hidden setup parameter menu 
will display. 

 

The required menu can be selected to display and set the setup parameters. 

 

2) 

Cancel the setup parameter selection. 
Key-in "N"  in # ( )‚ and then press INPUT. 
The setup parameter menu will disappear. 
Note:  The setup parameters are not displayed when the power is turned ON. 

 

(Note 1)  Refer to "5. Base Specifications Parameters" to "13. Position Switch" for details on the setup 

parameters. 

(Note 2)  Be sure to turn OFF the power supply after selecting the setup parameter. 
(Note 3)  If a key other than the screen changeover key is pressed when the setup parameters are locked, 

the message "Data Protected" will appear. 

 

MENU

 

I/O PAR

PROCESS

WORK

 

PARAM 3. 1/2 

[OPEN SETUP PARAM] 

Open the menu setup parameter?
 
   *YES: “Y” “INPUT” 
 
   *NO: “N” “INPUT”

 

SETUP

# (                  )