Справочник Пользователя для Mitsubishi Electronics E60
5.
BASE SPECIFICATIONS PARAMETERS
II - 23
#
Items
Details
Setting range (unit)
1017
(PR)
rot Rotational
axis
Specify whether the axis is a rotary axis or linear
axis.
For the rotary axis‚ the position display will be 360°‚
and the axis will return to 0°.
If the position display is to be continuously
displayed even with the rotary axis‚ set the axis as a
linear axis
axis.
For the rotary axis‚ the position display will be 360°‚
and the axis will return to 0°.
If the position display is to be continuously
displayed even with the rotary axis‚ set the axis as a
linear axis
0: Linear axis
1: Rotary axis
1: Rotary axis
1018
(PR)
ccw
Motor CCW
Specify the direction of the motor rotation to the
command direction.
command direction.
0: Rotates clockwise (looking from motor shaft)
with the forward rotation command.
1: Rotates counterclockwise (looking from
motor shaft) with the forward rotation
command.
command.
0: Rotates
clockwise
1: Rotates
counter-
clockwise
1019
(PR)
dia Diameter
specification
axis
axis
Specify whether the program movement amount is
to be commanded with the diameter dimension or
as movement amount.
When the movement amount is commanded with
the diameter dimensions‚ 5mm will be moved when
the command is a movement distance of 10mm.
The movement amount per pulse will also be
halved during manual pulse feed.
Among parameters concerning length‚ the tool
length‚ the wear compensation amount and the
workpiece coordinate offset are displayed in
diameter value when diameter is specified‚ but
other parameters are always displayed in radius
value.
to be commanded with the diameter dimension or
as movement amount.
When the movement amount is commanded with
the diameter dimensions‚ 5mm will be moved when
the command is a movement distance of 10mm.
The movement amount per pulse will also be
halved during manual pulse feed.
Among parameters concerning length‚ the tool
length‚ the wear compensation amount and the
workpiece coordinate offset are displayed in
diameter value when diameter is specified‚ but
other parameters are always displayed in radius
value.
0: Command
with
movement amount
1: Command
with
diameter dimension
1020
(PR)
sp_ax Spindle
Interpolation
Specify 1 when the NC control axis is used as the
spindle.
spindle.
0: The NC control axis
is used as the servo
axis.
axis.
1: The NC control axis
is used as the
spindle.
spindle.
1021
(PR)
mcp_no Drive unit I/F
channel No.
(servo)
(servo)
Using a 4-digit number, set the drive unit interface
channel No. and which axis in that channel is to be
used when connecting an axis drive unit.
High-order two digits : Drive unit interface
channel No.
Low-order two digits : Axis No.
When using the conventional fixed layout, set all
axes to "0000".
channel No. and which axis in that channel is to be
used when connecting an axis drive unit.
High-order two digits : Drive unit interface
channel No.
Low-order two digits : Axis No.
When using the conventional fixed layout, set all
axes to "0000".
0000
0101 to 0107
0201 to 0207
0101 to 0107
0201 to 0207
1022
(PR)
axname2 2nd axis
name
Set the name of the axis displayed on the screen
with two characters. (X1, Z2, etc.)
with two characters. (X1, Z2, etc.)
Two digits between A to
Z and 1 to 9 (Setting is
cleared when 0 is set)
Z and 1 to 9 (Setting is
cleared when 0 is set)
1023
(PR)
crsadr
Not
used.
1024
(PR)
crsinc
Not
used.