Справочник Пользователя для Mitsubishi Electronics E60

II - 88 

 

# 

Items 

Details 

Setting range (unit) 

2019  revnum  Return steps 

Set up the steps required for reference point return 
for each axis. 

0:  Does not execute reference point return. 
1 to max. number of NC axes: 
 

Sets up the steps required for reference point 

return. 

0 to max. number of 
NC axes 

2020  o

_chkp  Spindle 

orientation 
completion 
check during 
second zero 
point return 

Set up the distance from the second zero point to the 
position for checking that the spindle orientation has 
completed during second zero point return.  If the set 
value is 0, the above check is omitted. 

0 to 99999.999 (mm) 

2021  out

_f 

Maximum 
speed outside 
soft limit range 

Set up the maximum speed outside the soft limit 
range. 

0 to 999999 

2022 G30SLX  Validate soft 

limit (automatic 
and manual) 

Set up this function to disable a soft limit check 
during the second to the fourth zero point return in 
both automatic and manual operation modes. 

0:  Enables soft limit check. 
1:  Disables soft limit check. 

0/1 

2023  ozfmin 

Set up ATC 
speed lower 
limit 

Set up the minimum speed outside the soft limit 
range during the second to the fourth zero point 
return in both automatic and manual operation 
modes. 

0 to 999999 

2024 synerr 

 

Not used.