Справочник Пользователя для Mitsubishi Electronics E60

II - 289 

 

(SETUP PARAM 5. 1/15) 

4000 

(PR) 

Pinc Machine 

error 

offset increment 
method 

Specify whether to use the incremental 
amount method or absolute amount method 
when setting the machine error 
compensation data. 

0:  Absolute volume 

method 

1:  Incremental 

volume method 

 
<1st axis> 

4001 

cmpax 

Basic axis 

Specify the basic axis address for machine 
error compensation. 
1) For pitch error compensation‚ set the 

name of the axis to be compensated. 

2) For relative position compensation‚ set 

the name of the axis to be the base axis. 

X, Y, Z, U, V, W, A, B, 
or C axis address 

4002 drcax 

Compensation 
axis 

Set the compensation axis address for 
machine error compensation. 
1) For pitch error compensation‚ set the 

same axis name as #4001 cmpax. 

2) For relative position compensation‚ set 

the name of the axis to be actually 
compensated. 

X, Y, Z, U, V, W, A, B, 
or C axis address 

4003 rdvno 

Division 

point 

number at 
reference point 
position 

Set the compensation data No. 
corresponding to the reference point 
position. The reference point is actually the 
base‚ so there is no compensation No. Set 
the number that is decremented by 1. 

4101 to 5124 

4004 mdvno  Division 

point 

number at the 
most negative 
side 

Set the compensation data No. that is on 
the farthest negative side. 

4101 to 5124 

4005 pdvno 

Division 

point 

number at the 
most positive side 

Set the compensation data No. that is on 
the farthest positive side. 

4101 to 5124 

4006 sc 

Compensation 
scale factor 

Set the compensation amount’s scale. 

0 to 99 

4007 

spcdv 

Division interval 

Set the interval to divide the basic axis. 
Each compensation data will be the 
compensation amount for each of these 
intervals. 

1 to 9999999