Справочник Пользователя для Renesas SH7264
![Renesas](https://files.manualsbrain.com/attachments/59153266feca598c11e08bf1f143ccfcf45441a4/common/fit/150/50/d3d06de51d338eb4f916b44a9629f9d48697a59cd7344be40cf24bae01c5/brand_logo.gif)
Section 7 Interrupt Controller
R01UH0134EJ0400 Rev. 4.00
Page 165 of 2108
Sep 24, 2014
SH7262 Group, SH7264 Group
Bit Bit
Name
Initial
Value R/W
Value R/W
Description
1
NMIF
0
R
NMI Interrupt Request
This bit indicates the status of the NMI interrupt
request. This bit cannot be modified.
request. This bit cannot be modified.
0: NMI interrupt request has not occurred
[Clearing conditions]
Cleared by changing NMIE of ICR0
Cleared by executing NMI interrupt exception
Cleared by executing NMI interrupt exception
handling
1: NMI interrupt request is detected
[Setting condition]
Edge corresponding to NMIE of ICR0 has occurred
at NMI pin
Note: Only 640-Kbyte version is valid. For 1-Mbyte
version, this bit is reserved and always read as 0.
The write value should always be 0.
The write value should always be 0.
0 NMIM
1 R/(W)
*
2
NMI Mask
Selects whether to enable interrupt request input to
external interrupt input pin NMI.
external interrupt input pin NMI.
0: NMI input interrupt request is enabled
1: NMI input interrupt request is masked
Note: Only 640-Kbyte version is valid. For 1-Mbyte
version, this bit is reserved and always read as 0.
The write value should always be 0.
The write value should always be 0.