Справочник Пользователя для Rheem Electric Domestic Water Heater

Скачать
Страница из 36
 
INSTALLATION 
 
THIS WATER HEATER IS NOT SUITABLE FOR POOL HEATING 
 
WATER HEATER LOCATION 
This water heater is suitable for either outdoor or indoor installation (a model 
with a supply cord and plug is suitable for indoor installation only). Whether 
located outdoor or indoor, the water heater should be installed close to the 
most frequently used outlet and its position chosen with safety and service in 
mind. 
 
Clearance must be allowed for 
servicing of the water heater. The 
water heater must be accessible 
without the use of a ladder or scaffold. 
Make sure the temperature pressure 
relief valve lever is accessible and the 
front cover, thermostat, heating unit 
and if fitted, the side cover and 
temperature limiting valve can be 
removed for service. 
 
 
 
 
 
You must be able to read the 
information on the rating plate. If 
possible leave headroom of one water 
heater length so the anode can be 
inspected or replaced. Remember you 
may have to take the entire water 
heater out later for servicing. 
 
The installation must comply with the requirements of AS/NZS 3500.4, 
AS/NZS 3000 and all local codes and regulatory authority requirements. In New 
Zealand, the installation must conform with the New Zealand Building Code. 
 
It is recommended the water heater be installed at ground or floor level and 
must stand vertically upright. Remember all local authorities have regulations 
about putting water heaters into roof spaces. 
15