Листовка для Epson LQ-630
Installing the Printer Software
Installing the Printer Software
Installing the Printer Software
Installing the Printer Software
For Windows Me, XP, or 2000 users
Note:
Installing the printer software for Windows XP or 2000 may require administrator
privileges. If you have problems, ask your administrator for more information.
privileges. If you have problems, ask your administrator for more information.
1. Make sure that the printer is turned off.
2. Insert the printer software CD-ROM into the CD-ROM drive. The Install dialog box
appears.
Note:
If the Installer dialog box does not appear, double-click
Setup.exe
in the CD-ROM.
3. Select
Install Software
, and click
.
4. Follow the instructions on the screen.
For Windows 98, 95, or NT 4.0 users
Note:
❏ Installing the printer software for Windows NT 4.0 may require administrator
privileges. If you have problems, ask your administrator for more information.
❏ The examples in the following section are from the Windows 98 operating system.
They may vary in appearance from what actually appears on your screen;
however, the instructions are the same.
however, the instructions are the same.
1. Make sure that the printer is turned off, then insert the printer software CD-ROM into
the CD-ROM drive. The install dialog box appears.
Note:
If the Installer dialog box does not appear, double-click
Setup.exe
in the CD-ROM.
2. Select
Install Software
, and click
.
3. Select your printer, then click
OK
and follow the instructions on the screen.
4. When prompted, insert your Windows CD-ROM, and click
OK
.
Note:
❏ If your PC shipped with Windows pre-installed, setup may complete without
requiring the Windows CD-ROM, and your printer is ready to use.
❏ If you receive a message saying the drive is not accessible, click
Cancel
and try
again.
❏ If you are using Windows NT 4.0, go to step 5.
5. Click
Browse
to select appropriate path for the printer driver, then click
OK
and
follow the instructions on the screen.
Note:
If you are using Windows NT 4.0, insert your Windows CD-ROM when prompted on
the screen.
the screen.
6. Select the appropriate file in the folder, then click
OK
.
7. When prompted, insert the Printer Driver Software CD-ROM, then click
Browse
to
select appropriate path.
Note:
❏ If you receive a message saying the drive is not accessible, click
Cancel
and try
again.
❏ If a “
System Error
” message appears, click
Cancel
. The exact message differs
depending on your version of Windows.
❏ If you are using Windows NT 4.0, you do not need to specify a path.
❏ If you are using Windows 98, Printer Utility Setup may start. If it does, follow the
❏ If you are using Windows 98, Printer Utility Setup may start. If it does, follow the
instructions on the screen.
8. Setup is complete. You are ready to use.
For DOS programs
To control the printer from DOS application programs, you need to select the printer
you are using.
If the list in your application does not include your printer, choose the first available
printer from the list below.
Choose the EPSON printer at the appropriate step in the installation or setup
procedure. If the list in your application does not include your printer, choose the first
available printer from the list below:
you are using.
If the list in your application does not include your printer, choose the first available
printer from the list below.
Choose the EPSON printer at the appropriate step in the installation or setup
procedure. If the list in your application does not include your printer, choose the first
available printer from the list below:
Once the printer software has been successfully installed onto your computer,
your printer is ready to use.
your printer is ready to use.
Getting More Information
Using the Reference Guide
The Reference Guide provides detailed information on the Printer’s functions, optional
products, Printer software, troubleshooting, and technical specifications.
products, Printer software, troubleshooting, and technical specifications.
Follow these steps to access the Reference Guide from the CD-ROM:
1. Insert the printer software CD-ROM in the CD-ROM drive.
2. Double-click
User
Guides
from the screen. The online guide dialog box appears.
Replacing the Ribbon Cartridge
w
Warning:
If you have just used the printer, the printer may be hot; let it cool for a few minutes
before touching it.
before touching it.
When printing becomes faint, you need to replace the ribbon cartridge. Follow the
steps below.
steps below.
1. Make sure the printer is turned off and unplugged.
2. Open the printer cover and paper bail.
3. Hold the ribbon guide and move the print head slightly to the left.
4. Remove the ribbon cartridge by pulling the ribbon guide and then the body of the
cartridge forward.
5. Follow steps 5 - 10 in the Assembling the Printer section on the front of this Setup
Guide.
Note:
EPSON recommends the use of genuine EPSON ribbon cartridges (S015290).
Error Indicators
If your printer stops working and one or more control panel lights are on or flashing or
the printer beeps, use the following table to diagnose and fix the problem.
For other patterns, refer to the Reference Guide.
the printer beeps, use the following table to diagnose and fix the problem.
For other patterns, refer to the Reference Guide.
o
= off, n = on,
f
= flashing
•••
= short series of beeps (three beeps)
1) LQ-680/LQ-680 Pro
6) LQ-300+
2) LQ-670
7) LQ-1150
3) DLQ-3500
8) LQ-2070/2080
4) DLQ-3000+
9) LQ-2170/2180
5) LQ-580/LQ-570e
10) EPSON LQ printer
State of
panel lights
panel lights
Beep
pattern
pattern
Problem
Solution
n
Power
n
Pause
n
Paper Out
•••
No paper is loaded in the selected paper source.
Load paper in the selected paper source; the Paper Out and Pause light go off and the
printer resumes printing.
printer resumes printing.
n
Power
n
Pause
f
Paper Out
•••
Paper is not loaded correctly.
Remove and reload your paper correctly, then press the Pause button. See Paper Handling
in the online Reference Guide for paper-loading instructions.
in the online Reference Guide for paper-loading instructions.
Paper is not fully ejected.
Press the Load/Eject button to eject the sheet.
n
Power
n
Pause
o
Paper Out
•••
The paper release lever is set to the wrong position.
Set the paper release lever to the position for the paper source you want to use. If paper
from another paper source is currently in the paper path, press the Load/Eject button to
eject the paper; then move the paper release lever to the desired position.
from another paper source is currently in the paper path, press the Load/Eject button to
eject the paper; then move the paper release lever to the desired position.
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON
printer. EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product
or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.
printer. EPSON is not responsible for any use of this information as applied to other printers. Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product
or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION. EPSON and EPSON ESC/P are registered trademarks and EPSON ESC/P2
is a trademark of SEIKO EPSON CORPORATION. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines Corporation.
is a trademark of SEIKO EPSON CORPORATION. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation. IBM is a registered trademark of International Business Machines Corporation.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright© 2002 by SEIKO EPSON CORPORATION, Nagano, Japan.
Printed in XXXX