Справочник Пользователя для Cisco SRW208

 

•

Enables QoS on the interface.

 

•

Enables  Advanced  mode  QoS  on  the 

interface.

Specifies  the  CoS  priority  tag  values, 

where zero is the lowest and 7 is the highest.

Defines the traffic forwarding queue to which the 

CoS  priority  is  mapped.  Four  traffic  priority  queues  are 

supported.
The Restore Defaults button restores the device factory 

defaults for mapping CoS values to a forwarding queue.

Interface  to  which  the  CoS  configuration 

applies.

Determines  the  default  CoS  value  for 

incoming packets for which a VLAN tag is not defined. The 

possible field values are 0-7. The default CoS is 0.

Restores the device factory defaults for 

mapping CoS values to a forwarding queue.

LAG to which the CoS configuration applies.

QoS > Queue Settings

The Queue Setting screen contains fields for defining the 

QoS queue forwarding types. 

Indicates  that  traffic  scheduling  for  the 

selected queue is based strictly on the queue priority. 

Indicates  that  traffic  scheduling  for  the  selected 

queue is based strictly on the WRR.

Displays the queue for which the queue settings 

are displayed. The possible field range is 1 - 4.

Displays the WRR weights to queues.

Displays the amount of bandwidth 

assigned to the queue. These values are fixed and are not 

user defined.

QoS > DSCP Settings

The DSCP Settings screen enables mapping DSCP values to 

specific queues.
The DSCP Settings screen contains the following fields:

Indicates  the  Differentiated  Services  Code  Point 

value in the incoming packet.

Maps the DSCP value to the selected queue.

QoS > Bandwidth

The Bandwidth screen allows network managers to define 

the  bandwidth  settings  for  a  specified  egress  interface.