Справочник Пользователя для Cisco SRW208
Chapter 5
Advanced Configuration
40
8-Port 10/100 Ethernet Switch with Webview
Out of Profile DSCP
Advanced Mode > Out of Profile DSCP
DSCP In
Displays the DSCP In value.
DSCP Out
Displays the current DSCP out value. A new
value can be selected from the pull-down menu.
The Policy Settings button opens the Policy Name
The Policy Settings button opens the Policy Name
screen.
Policy Name
Advanced Mode > Policy Name
Policy Name
Defines a new Policy name.
Add to List
The Add to List button will add the policy to
the Policy Name table.
Select Policy
Selects an existing Policy by name. The
Policy can be comprised of:
Class Map
•
Action
•
Policer
•
New Policy Name
Defines a new Policy name.
Class Map
Selects an existing Class Map by name.
New Class Map
The New Class Map button opens the
New Class Map screen.
New Class Map
Advanced Mode > New Class Map
Class Map Name
Defines a new Class Map name
Preferred ACL
Indicates if packets are first matched to
an IP based ACL or a MAC based ACL. The possible field
values are:
IP Based ACLs
•
Matches packets to IP based ACLs first,
then matches packets to MAC based ACLs.
MAC Based ACLs
•
Matches packets to MAC based
ACLs first, then matches packets to IP based ACLs.
IP ACL
Matches packets to IP based ACLs first, then
matches packets to MAC based ACLs.
Match
Criteria used to match IP addresses and /or MAC
addresses with an ACL’s address.The possible field values
are:
And
•
Both the MAC-based and the IP-based ACL must
match a packet.
Or
•
Either the MAC-based or the IP-based ACL must
match a packet.
MAC ACL
Matches packets to MAC based ACLs first, then
matches packets to IP based ACLs.
Police
Enables Policer functionality.
Type
Policer type for the class. Possible values are:
Aggregate Policer
Configures the class to use a
configured aggregate policer selected from the drop-
down menu. An aggregate policer is defined if the
policer is shared with multiple classes. Traffic from two
different ports can be configured for policing purposes.
An aggregate policer can be applied to multiple classes in
the same policy map, but cannot be used across different
policy maps.
Single
Configures the class to use manually configured
information rates and exceed actions.
Aggregate Policer
User-defined aggregate policers.