Руководство Пользователя для RCA vr639hf

The Go-To Search feature enables the VCR to quickly locate a
counter reading anywhere on the tape. When the VCR locates
the counter reading, it will begin playback.

1. Press STOP.

2. Press SEARCH on the remote until the GO-TO SEARCH menu

appears on the screen.

3. Press number buttons to enter the hour and/or minute of

the counter reading you want the VCR to “go to.” Press
CLEAR on the remote to correct an entry.

4. Press FWD to search ahead or REV to search behind.

5. Press STOP to end Go-To searching.

Your VCR has automatic tracking which removes interference like
streaks or “snow” from the picture. Automatic tracking is
automatically activated when you insert a tape or turn on the
VCR. Occasionally you may need to manually adjust tracking,
especially if the tape was recorded on a different VCR. Just use
the CHANNEL TRACKING buttons (TRACK on the remote) to
reduce the distortion. You can also use tracking when you pause
a tape to reduce jittering of the picture.

When you manually adjust the picture, automatic tracking is
turned off. To turn automatic tracking back on, press both
CHANNEL TRACKING buttons on the front of the VCR at the
same time, or eject the tape and re-insert it. Tracking has no
effect during recording– only playback.

GO-TO SEARCH

Current tape counter is

  2:17:25

Press REV or FWD
to go to 0:00:00

Press SEARCH to exit.

P

ICTURE

 S

EARCH