Руководство Пользователя для RCA vr639hf

To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the
VCR or remote won’t work.

•

To Lock: Press and hold the VCR button on the remote
for approximately six seconds. All digits on the front panel
flash when this feature is activated. Digits also flash if you
turn on the VCR while locking is on.

•

To Lock While a Timer Recording is in Progress: Press
and hold the VCR button on the remote for approximately
six seconds. All lighted digits on the front panel flash when
this feature is activated.

•

To Unlock: Press and hold the VCR button on the remote for
approximately six seconds.

The time counter shows the actual time it takes to record a
program or play back a segment of a recorded tape. It helps
locate the beginning or end of programs you taped. The time
counter resets to 0:00:00 whenever the tape is ejected from
the␣ VCR.

For example, if you record a 30-minute program at the
beginning of the tape and you want to go to the end of
that program to begin another recording, you would:

1. Press INFO twice to display the time counter.

2. Press CLEAR to reset the time counter to 0:00:00.

3. Press FWD to forward the tape until the time counter

reads 0:30:00.

4. Press STOP. This is the approximate end of the program.

(You may want to press PLAY to verify.) Now, you can
begin recording at this spot.

5. Press INFO twice to remove the time counter from the

screen and return to the normal display mode.

                0:30:00

SECONDS

MINUTES

HOURS